26-10-2022, 08:33 PM
(This post was last modified: 26-10-2022, 08:34 PM by Murphyv310.)
Interesting David.
I'll be watching intensely on your progress. Nice to see another valve band 1 modulator after my rod pentode one.
Im wondering if you could make a self oscillating modulator with the G3 as your signal in, adding stages can increase complexity, reduce reliability and increase noise, often seen these days on overly complex amateur radio transceivers that generate a lot of noise on receive then have to add in noise limiters, sorry for drifting OT.
Anyway good luck with the project and let's see if like me you can do it with two valves.
I'll be watching intensely on your progress. Nice to see another valve band 1 modulator after my rod pentode one.
Im wondering if you could make a self oscillating modulator with the G3 as your signal in, adding stages can increase complexity, reduce reliability and increase noise, often seen these days on overly complex amateur radio transceivers that generate a lot of noise on receive then have to add in noise limiters, sorry for drifting OT.
Anyway good luck with the project and let's see if like me you can do it with two valves.
