05-09-2022, 09:39 PM
Cheers.
Remove it from the top of the winding to the centre tap.
It goes from the bottom which is correct (anode) to the centre (reservoir cap) winding as this is a humbucking type of output transformer.
That should cure it and please return the G2 to the original position as per the diagram.
Remove it from the top of the winding to the centre tap.
It goes from the bottom which is correct (anode) to the centre (reservoir cap) winding as this is a humbucking type of output transformer.
That should cure it and please return the G2 to the original position as per the diagram.
