15-01-2022, 01:49 PM
Thanks for your feedback Andy/Trevor.
The stands that these are current on are the ones for the Heybrooks HB2 2000's. I do have the original wood stands for these but they are in such poor condition I didn't want to put them out (they are mdf and covered in hammerite type silvery/grey metallic paint thats now very worn and looks ugly. I've just bought some very low wood stands (6" high) that should do the job with these are about the same height as the originals.
My speakers have SEAS 25TN tweeters and VIFA M 21 WJ-09-08 bass drivers which replaced the original speakers at some point in the past I which I believe are are a good selection to make and are sounding in the same instance to the original 770's from what I can remember.
I must admit that I can't seem to find any info on the Missions 770 'S' speakers which these models are?
Yes, I agree, I do now need to look at this amp but having 2 of these would it be wise to leave this one in 'temporary use' and look at the other to get that fully up and working?
Best Regards
Rob
The stands that these are current on are the ones for the Heybrooks HB2 2000's. I do have the original wood stands for these but they are in such poor condition I didn't want to put them out (they are mdf and covered in hammerite type silvery/grey metallic paint thats now very worn and looks ugly. I've just bought some very low wood stands (6" high) that should do the job with these are about the same height as the originals.
My speakers have SEAS 25TN tweeters and VIFA M 21 WJ-09-08 bass drivers which replaced the original speakers at some point in the past I which I believe are are a good selection to make and are sounding in the same instance to the original 770's from what I can remember.
I must admit that I can't seem to find any info on the Missions 770 'S' speakers which these models are?
Yes, I agree, I do now need to look at this amp but having 2 of these would it be wise to leave this one in 'temporary use' and look at the other to get that fully up and working?
Best Regards
Rob
if all else fails...read the instructions!
