03-01-2022, 07:37 PM
(This post was last modified: 03-01-2022, 07:38 PM by boater sam.)
Its rubbish work top, hollows under the heat formed rolled edge, take it back or just chuck it and buy some proper stuff from a good supplier not a shed.
If it was proper stuff, it would not dent like that so it was poor quality before you cut it, get a refund. Tap it along the roll and you will hear the hollows.
If you keep it, there will be many more defects apparent after a short time and you will never be happy with it.
If it was proper stuff, it would not dent like that so it was poor quality before you cut it, get a refund. Tap it along the roll and you will hear the hollows.
If you keep it, there will be many more defects apparent after a short time and you will never be happy with it.
Boater Sam.
