02-12-2021, 10:32 AM
(This post was last modified: 02-12-2021, 10:34 AM by Mike Watterson.)
A screen on a wire on the DAC10 could be earthed at the IFT can, but should not connect to anything at the pot end. The earthy end of pot should not be linked to body on the DAC10. Certainly a screen on the audio of DAC10 could have originally been to the cathode resistor. But using both options is totally wrong.
In general internal screens in equipment should only connect at one end, not both. The only exception might be the signal and earth from a tag strip under a record turntable to the pre-amp or volume control. Maybe tape heads.
In general internal screens in equipment should only connect at one end, not both. The only exception might be the signal and earth from a tag strip under a record turntable to the pre-amp or volume control. Maybe tape heads.
