02-11-2021, 08:01 PM
Hi Stephen
They look more acceptable that brightly coloured modern ones.
The ones that I fitted were 6KV 0.22 uF + 0.033 uF.
The 0.22 uF cap is the largest film cap that I have seen. I had to shave the corners off to get it to fit inside the 75 mm down pipe that I used for the replicas.
Photo below of one shaved capacitor that will just about fit and another waiting to be done.
There are three 0.025 uF 4500V capacitors that will need replacing. Two look original even though one it nearly twice the size of the other.
These two can be restuffed. The other one will need replicating as it was replaced with a Visconol.
Frank
They look more acceptable that brightly coloured modern ones.
The ones that I fitted were 6KV 0.22 uF + 0.033 uF.
The 0.22 uF cap is the largest film cap that I have seen. I had to shave the corners off to get it to fit inside the 75 mm down pipe that I used for the replicas.
Photo below of one shaved capacitor that will just about fit and another waiting to be done.
There are three 0.025 uF 4500V capacitors that will need replacing. Two look original even though one it nearly twice the size of the other.
These two can be restuffed. The other one will need replicating as it was replaced with a Visconol.
Frank
