11-10-2021, 09:05 AM
Hi all,
I finally managed to get to the diode (CD1 OA70) and I tested it after taking it out of the circuit. My multimeter shows OL in both diode and resistance mode, measured both ways. I am waiting for the delivery of 1n60 diodes and will fit one once they arrive. In the IFT3 I also found a Hunts electrolytic (C20) which should measure 0.01 uF but my reading gives me 0.03 UF. I might replace it along with another Hunts and last electrolytic on the chassis - the C7 which should be 0.02uF but gives me 0.08uF.
Many thanks for your help,
TinaRotator
I finally managed to get to the diode (CD1 OA70) and I tested it after taking it out of the circuit. My multimeter shows OL in both diode and resistance mode, measured both ways. I am waiting for the delivery of 1n60 diodes and will fit one once they arrive. In the IFT3 I also found a Hunts electrolytic (C20) which should measure 0.01 uF but my reading gives me 0.03 UF. I might replace it along with another Hunts and last electrolytic on the chassis - the C7 which should be 0.02uF but gives me 0.08uF.
Many thanks for your help,
TinaRotator
