07-10-2021, 08:11 PM
(This post was last modified: 07-10-2021, 08:16 PM by TinaRotator.)
The C33 aka C25 is now replaced with 220uF 10V. Penguin you are right about the Voltage, the old one was 6V. I will purchase something with higher capacitance soon.
In the meanwhile I was trying what Crackle suggested and I am absolutely amazed - I was playing about with a jumper cable placing it on different parts and by putting it near TR3 I get loud and clear audio from speaker! I am in absolute awe now
. Just listened to a bit of Radio 4 news and I couldn't be any happier.
The audio seems to be best on first leg of the housing for IFT3, but it's clearly audible in two other places. How do I sort it out permanently? Should I just solder a wire and call it a day or should I be searching for what's wrong on the path from Wiper to IFT3?
Many thanks,
TinaRotator
In the meanwhile I was trying what Crackle suggested and I am absolutely amazed - I was playing about with a jumper cable placing it on different parts and by putting it near TR3 I get loud and clear audio from speaker! I am in absolute awe now
. Just listened to a bit of Radio 4 news and I couldn't be any happier. The audio seems to be best on first leg of the housing for IFT3, but it's clearly audible in two other places. How do I sort it out permanently? Should I just solder a wire and call it a day or should I be searching for what's wrong on the path from Wiper to IFT3?
Many thanks,
TinaRotator
