06-10-2021, 08:55 AM
(This post was last modified: 06-10-2021, 09:01 AM by Radio Fixer.)
Here is a pic of a rare valve re-metalised with the Original Electrolube Nickel Spray. Finish was a dark grey but sprayed over with gold paint. Still good.
Dont bother with the new stuff: I tried many primers, even one sent by Electrolube, and none of them made the nickel stay on the valve.
Bet the Zinc Primer wont be conductive, none of the Weld Thru Zinc Primers are. Yes! to a welding gun maybe but not to tiny voltages and RF.
Gary
Dont bother with the new stuff: I tried many primers, even one sent by Electrolube, and none of them made the nickel stay on the valve.
Bet the Zinc Primer wont be conductive, none of the Weld Thru Zinc Primers are. Yes! to a welding gun maybe but not to tiny voltages and RF.
Gary
