09-09-2021, 01:48 PM
Hi.
The fact that the amp was working prior to fitting the controls (assuming you had an output bar the noisy pots) makes me think there could be a simple problem.
Well spotted Mark on the cooked resistor and I didn't see it on the phone. It looks as if its a feed from the PSU, long now since I've repaired this model so forgotten. Like I say check your work before getting bogged down going too deep. While I respect others contribution, use ears, eyes and nose, recheck any work done in the first instance even before applying power, check for O/C speaker leads or plugs, it's surprising how many faults are found in these basic checks.
Hope you're feeling better. Don't over do things.
The fact that the amp was working prior to fitting the controls (assuming you had an output bar the noisy pots) makes me think there could be a simple problem.
Well spotted Mark on the cooked resistor and I didn't see it on the phone. It looks as if its a feed from the PSU, long now since I've repaired this model so forgotten. Like I say check your work before getting bogged down going too deep. While I respect others contribution, use ears, eyes and nose, recheck any work done in the first instance even before applying power, check for O/C speaker leads or plugs, it's surprising how many faults are found in these basic checks.
Hope you're feeling better. Don't over do things.
