19-08-2021, 11:32 AM
My first guess on the diodes is that one of them will allow the shift control to work with less lag in one direction, by reducing the time constant wrt the coupling caps. I've no idea why this should be a good thing.
I also wonder if it's to provide a lower impedance path for any stray current on the Y plates. It's possible that a very small current will flow from the beam to the plates in normal operation. A current will definitely flow if the Y shift is at an extreme and the beam hits a plate.
I also wonder if it's to provide a lower impedance path for any stray current on the Y plates. It's possible that a very small current will flow from the beam to the plates in normal operation. A current will definitely flow if the Y shift is at an extreme and the beam hits a plate.
www.borinsky.co.uk Jeffrey Borinsky www.becg.tv







