14-08-2021, 11:55 AM
I have got the same model inherited from my great aunt. It is now 110 volt only due to a duff dropper cable.
I stuck the aerial back on with conformal coating and left the chassis on its back for a few hours to set.
Without the dropper they run on 85 volts. The output pentode is if anything under run so there is still plenty of audio running at the sum of the heater voltages.
I stuck the aerial back on with conformal coating and left the chassis on its back for a few hours to set.
Without the dropper they run on 85 volts. The output pentode is if anything under run so there is still plenty of audio running at the sum of the heater voltages.
