15-07-2021, 02:19 PM
(This post was last modified: 15-07-2021, 02:21 PM by Geordie McBoyne.)
Kalee20 wrote: "What diameter, etc? There's a chance I may be able to help.
I'll bet it works quite well, when operating properly, too.
Definitely needs saving, if only as an example of how not to go into production with a radio!"
Hi Kalee,
all the wiring is 22swg so I reckon 1.5mm bore sleeving will be fine.
The internals do look a right mess but I can vouch these sets do do perform very well indeed. Excellent selectivity and good quality sound.
From the Radiomuseum: https://www.radiomuseum.org/r/philips_v5a_v_5_a.html
Philips France version: https://www.radiomuseum.org/r/philips_pi...4av_4.html
Side contact valves in continental sets.
Geordie McBoynes.
I'll bet it works quite well, when operating properly, too.
Definitely needs saving, if only as an example of how not to go into production with a radio!"
Hi Kalee,
all the wiring is 22swg so I reckon 1.5mm bore sleeving will be fine.
The internals do look a right mess but I can vouch these sets do do perform very well indeed. Excellent selectivity and good quality sound.
From the Radiomuseum: https://www.radiomuseum.org/r/philips_v5a_v_5_a.html
Philips France version: https://www.radiomuseum.org/r/philips_pi...4av_4.html
Side contact valves in continental sets.
Geordie McBoynes.
