|
Pye VT4
|
|
01-04-2021, 05:02 PM
(This post was last modified: 01-04-2021, 05:08 PM by Murphyv310.)
All the Pye V4 LOPT I have here, have faults in the primaries unfortunately.
They were never the best transformers. On an open transformer two turns of wire round the core is enough for the feedback winding. |
| Messages In This Thread |
|
Pye VT4 - by Murphyv310 - 30-03-2021, 05:37 PM
RE: Pye VT4 - by Geordie McBoyne - 31-03-2021, 03:52 PM
RE: Pye VT4 - by Murphyv310 - 31-03-2021, 04:35 PM
RE: Pye VT4 - by Geordie McBoyne - 01-04-2021, 10:24 AM
RE: Pye VT4 - by Murphyv310 - 01-04-2021, 04:05 PM
RE: Pye VT4 - by peter scott - 01-04-2021, 04:19 PM
RE: Pye VT4 - by Murphyv310 - 01-04-2021, 05:02 PM
RE: Pye VT4 - by Geordie McBoyne - 01-04-2021, 05:34 PM
RE: Pye VT4 - by Geordie McBoyne - 02-04-2021, 12:27 PM
RE: Pye VT4 - by Murphyv310 - 02-04-2021, 04:22 PM
RE: Pye VT4 - by Freya - 02-04-2021, 05:54 PM
RE: Pye VT4 - by Murphyv310 - 04-04-2021, 09:12 PM
RE: Pye VT4 - by Murphyv310 - 05-04-2021, 03:10 PM
|
| Users browsing this thread: |
| 1 Guest(s) |
