14-03-2021, 03:29 PM
Hi.
Well the main smoothing caps were in a sorry mess I didn't realise they were so bad on the side that wasn't visible, one had eaten right through the alloy. So one brand new cap was fitted and two other NOS ones have been fitted. The 1.5k feed to the audio amp was O/C and has been replaced. I've now fitted the nine 6.8m resistors in the bleeder circuit. HT has been run up and is fine.
I hope that during the week I'll be able to power the set up and see what else needs to be done.
Pictures soon!!!
Well the main smoothing caps were in a sorry mess I didn't realise they were so bad on the side that wasn't visible, one had eaten right through the alloy. So one brand new cap was fitted and two other NOS ones have been fitted. The 1.5k feed to the audio amp was O/C and has been replaced. I've now fitted the nine 6.8m resistors in the bleeder circuit. HT has been run up and is fine.
I hope that during the week I'll be able to power the set up and see what else needs to be done.
Pictures soon!!!
