22-12-2020, 04:45 PM
(This post was last modified: 22-12-2020, 04:47 PM by Murphyv310.)
Hi.
I've been running the set on test today. Its had a good couple of hours soak.
No real issues just a slight reduction of width after around an hour but it stabilises thereafter, there is a little false triggering on line that clears with careful adjustment of the line hold but brightness level changes can bring it back. It could be EHT smoothing or an issue in the LOPT, not so sure yet but I'll look at that issue at some other time as its not hugely bad. Overall very happy with the results.
https://youtu.be/tUCp-_LqG54.
I've been running the set on test today. Its had a good couple of hours soak.
No real issues just a slight reduction of width after around an hour but it stabilises thereafter, there is a little false triggering on line that clears with careful adjustment of the line hold but brightness level changes can bring it back. It could be EHT smoothing or an issue in the LOPT, not so sure yet but I'll look at that issue at some other time as its not hugely bad. Overall very happy with the results.
https://youtu.be/tUCp-_LqG54.
