14-08-2020, 05:10 AM
You've put a lot of work in there Tracey, nice work. Re 6BS7's I had 5 NOS in a box and tested them for grid leakage when somebody was after one for the same application. I used I think a 1m as Rg1 as a sense resistor, ran the the valve with fixed bias, probably something like -3v on the grid, out of the five I got two that tested as per the datasheet.
Re CCS I've always used a zener (6v2) to fix the base, but in most applications I've had plenty of voltage to play with, not so good if you only have 30v or so. Making Re partly adjustable helps too.
Andy.
Re CCS I've always used a zener (6v2) to fix the base, but in most applications I've had plenty of voltage to play with, not so good if you only have 30v or so. Making Re partly adjustable helps too.
Andy.







