10-08-2020, 09:42 AM
(This post was last modified: 10-08-2020, 09:48 AM by Geordie McBoyne.)
The MW6-2 shown in the attachment was taken out from the Philips 600A projection TV set I've been working on during the lockdown period. After finally getting the line timebase to work and sorting out the tube protection circuits a very dim picture could be seen on the screen when the workshop lights were extinguished.
A replacement tube was found in the shop and duly fitted. Picture is slightly better but it's still a lights out job to see anything on the screen. A vivid picture can be seen on the CRT screen.
Geordie McBoyne.
A replacement tube was found in the shop and duly fitted. Picture is slightly better but it's still a lights out job to see anything on the screen. A vivid picture can be seen on the CRT screen.
Geordie McBoyne.
