20-07-2020, 06:07 PM
I have checked for solder splatter, etc - nothing that I can see.
I have measure voltages of V3 with only the EZ81 and V3 in place and these are as follows, dc voltages:
Pin 1 = 240v
Pin 2 = 72.2v
Pin 3 = 80v (very slowly dropping)
Pin 4 = 0v
Pin 5 = 0v
Pin 6 = Fluctuating between 235v & 239v
PIn 7 = 70.9v
Pin 8 = 80v
pin 9 = 0v
Am I correct in thinking that the heaters are not seeing and voltage at all??
I have measure voltages of V3 with only the EZ81 and V3 in place and these are as follows, dc voltages:
Pin 1 = 240v
Pin 2 = 72.2v
Pin 3 = 80v (very slowly dropping)
Pin 4 = 0v
Pin 5 = 0v
Pin 6 = Fluctuating between 235v & 239v
PIn 7 = 70.9v
Pin 8 = 80v
pin 9 = 0v
Am I correct in thinking that the heaters are not seeing and voltage at all??
if all else fails...read the instructions!







