Thanks for your help Mike
Yes, that is indeed the circuit.
I will get the chassis out of the amp as there is no point in going through the fault testing with it in place.
Just in case I have created a problem, if you look at the 2nd pic to post #54, I put a tag strip in place to for the valve heaters and also for an early earth connection to which the centre taps of the rectifier main connections, valve heater connections and the 50uF dual cap. Would this be an issue?
Best Regards
Yes, that is indeed the circuit.
I will get the chassis out of the amp as there is no point in going through the fault testing with it in place.
Just in case I have created a problem, if you look at the 2nd pic to post #54, I put a tag strip in place to for the valve heaters and also for an early earth connection to which the centre taps of the rectifier main connections, valve heater connections and the 50uF dual cap. Would this be an issue?
Best Regards
if all else fails...read the instructions!
