11-02-2020, 01:28 PM
This gen uses air cored coils, so no adjustment there! There are cap trimmers using wire wrapping around some tubing, there is also a trimmer across the tuning gang, since this is common to all bands I may try adjusting that. I have a frequency meter so I can get the results very close to MFR spec of 1%.
What puzzles me is that there is only one adjustment on each band, and since capacity adjustment is usual done at the hf end of band, I am wondering how the lf end can adjusted to get good dial tracking
What puzzles me is that there is only one adjustment on each band, and since capacity adjustment is usual done at the hf end of band, I am wondering how the lf end can adjusted to get good dial tracking
