11-08-2019, 08:34 AM
So maybe 5 & 6 is the isolated feed back to ground/0V and grid circuit, 2 is HT, 1 is RF triode anode and 4 is audio Triode anode?
Though I'm probably wrong
1 --(47)-- 2 --(404)-- 4
==================
. 5 -- (170)-- 6
I have a doubt as I'd have expected the separate winding to be the lowest resistance and 1--2 to be much higher. Unless Pin 1 is capacitor isolated from grid and then 5--6 is in the HT feed to RF triode.
See which wires go to HT and which to which anodes and if any to 0V?
Though I'm probably wrong
1 --(47)-- 2 --(404)-- 4
==================
. 5 -- (170)-- 6
I have a doubt as I'd have expected the separate winding to be the lowest resistance and 1--2 to be much higher. Unless Pin 1 is capacitor isolated from grid and then 5--6 is in the HT feed to RF triode.
See which wires go to HT and which to which anodes and if any to 0V?
