13-07-2019, 08:32 PM
(This post was last modified: 13-07-2019, 08:38 PM by Mike Watterson.)
Yes, RAP. Scott was the mad number of valves. Some Chromed RAP even had plate glass backs (with an air gap)!
https://www.radiomuseum.org/r/rap_646.html Second photo down.
They also experimented with modular designs. Choice of RF and AF modules on that one.
My wreck is T19D, says so on the plate. At least the sockets are still on it. Only volume control, audio transformer, mains transformer, cabinet, back, scale and mains lead missing.
I can colour laser print onto polyester film and put that behind glass.
I have a mains transformer from a Philips that was missing scale, all the sockets and audio transformer.
I have audio transformers.
I might have the octal valves, or a nearby friend may have them.
Now what sort of box?
https://www.radiomuseum.org/r/rap_646.html Second photo down.
They also experimented with modular designs. Choice of RF and AF modules on that one.
My wreck is T19D, says so on the plate. At least the sockets are still on it. Only volume control, audio transformer, mains transformer, cabinet, back, scale and mains lead missing.
I can colour laser print onto polyester film and put that behind glass.
I have a mains transformer from a Philips that was missing scale, all the sockets and audio transformer.
I have audio transformers.
I might have the octal valves, or a nearby friend may have them.
Now what sort of box?
