|
Pye VT4
|
|
08-01-2019, 10:15 AM
I can easily change the boost cap, disconnect the EY51 and scan coils. With care I can disconnect the LOPT and ring it to see if there are any shorted turns. I would have expected any of these failures to cause some signs of distress. Or am I wrong?
www.borinsky.co.uk Jeffrey Borinsky www.becg.tv
|
| Messages In This Thread |
|
Pye VT4 - by ppppenguin - 04-01-2019, 02:07 PM
RE: Pye VT4 - by Murphyv310 - 05-01-2019, 09:56 AM
RE: Pye VT4 - by ppppenguin - 05-01-2019, 10:53 AM
RE: Pye VT4 - by Murphyv310 - 05-01-2019, 11:40 AM
RE: Pye VT4 - by Terry - 05-01-2019, 02:03 PM
RE: Pye VT4 - by peter scott - 05-01-2019, 02:18 PM
RE: Pye VT4 - by Terry - 05-01-2019, 03:39 PM
RE: Pye VT4 - by Murphyv310 - 05-01-2019, 05:13 PM
RE: Pye VT4 - by Terry - 05-01-2019, 06:42 PM
RE: Pye VT4 - by peter scott - 05-01-2019, 06:13 PM
RE: Pye VT4 - by Murphyv310 - 05-01-2019, 08:11 PM
RE: Pye VT4 - by peter scott - 05-01-2019, 08:57 PM
RE: Pye VT4 - by Terry - 05-01-2019, 09:01 PM
RE: Pye VT4 - by Murphyv310 - 05-01-2019, 10:42 PM
RE: Pye VT4 - by ppppenguin - 08-01-2019, 08:42 AM
RE: Pye VT4 - by ppppenguin - 08-01-2019, 09:37 AM
RE: Pye VT4 - by Terry - 08-01-2019, 03:38 PM
RE: Pye VT4 - by Murphyv310 - 08-01-2019, 09:59 AM
RE: Pye VT4 - by ppppenguin - 08-01-2019, 10:15 AM
RE: Pye VT4 - by Murphyv310 - 08-01-2019, 02:07 PM
RE: Pye VT4 - by ppppenguin - 08-01-2019, 02:36 PM
RE: Pye VT4 - by ppppenguin - 08-01-2019, 05:05 PM
RE: Pye VT4 - by Murphyv310 - 08-01-2019, 05:27 PM
|
| Users browsing this thread: |
| 1 Guest(s) |
