05-11-2018, 12:43 PM
Hi Jeffrey
I will be using a Cyclone IV EP4CE10 on a development board made by Waveshare. It has 2 mm headers which are shorter than the 2.54 mm ones. I have a PCB made up with most of the components mounted on it. The ADC is a AD7476 which is a 12 bit that the sample rate can be controlled by the FPGA.
It's all a long way down the track yet.
Frank
I will be using a Cyclone IV EP4CE10 on a development board made by Waveshare. It has 2 mm headers which are shorter than the 2.54 mm ones. I have a PCB made up with most of the components mounted on it. The ADC is a AD7476 which is a 12 bit that the sample rate can be controlled by the FPGA.
It's all a long way down the track yet.
Frank
