10-08-2018, 10:41 AM
Luckily I was given one of these when I was at school. One of my dad's friends rescued it from an office clearout.
I had to replace all of the capacitors in the EHT multiplier and apart from quite a few dry joints it seems OK. It's an interesting machine and there is a good write up on the old calculator site:
https://oldcalculatormuseum.com/friden130.html
Ging
I had to replace all of the capacitors in the EHT multiplier and apart from quite a few dry joints it seems OK. It's an interesting machine and there is a good write up on the old calculator site:
https://oldcalculatormuseum.com/friden130.html
Ging
