21-02-2018, 10:25 AM
I have seen resistors burn out in the IF stages of an AR88 comms receiver.
There was a load of char coal in the mains selector so that it was intermittent.
The repeated power cycling caused the grids to act like diodes so that the resistors in the anodes were burned and split open due to pulses of anode current.
The circuit in question appears to have a number of power switching events going on using more than one device.
There was a load of char coal in the mains selector so that it was intermittent.
The repeated power cycling caused the grids to act like diodes so that the resistors in the anodes were burned and split open due to pulses of anode current.
The circuit in question appears to have a number of power switching events going on using more than one device.







