29-01-2018, 01:12 PM
Hi Terry
Post #3 has the full picture, switch 5 is in the screen circuit of V1, I didnt think it relevant to include it. Probably to limit V1 use when the radio is switched to gram. Switch 2 is only closed on MW so maybe coil I E is LW coupling and D A is the MW coupling coil.
I have extricated the oscillator coil, dismantled it and found a the break in the wire on the LW coil, it is now repaired. The coil is fitted back into the chassis and now I have the job of replacing the switches, trimmers and the rest of the wiring I removed to get it out.
I'll post some photos later.
Mike
Post #3 has the full picture, switch 5 is in the screen circuit of V1, I didnt think it relevant to include it. Probably to limit V1 use when the radio is switched to gram. Switch 2 is only closed on MW so maybe coil I E is LW coupling and D A is the MW coupling coil.
I have extricated the oscillator coil, dismantled it and found a the break in the wire on the LW coil, it is now repaired. The coil is fitted back into the chassis and now I have the job of replacing the switches, trimmers and the rest of the wiring I removed to get it out.
I'll post some photos later.
Mike






