29-12-2017, 10:36 PM
(This post was last modified: 29-12-2017, 10:37 PM by Geordie McBoyne.)
Hi Trevor, the attachment shows page 32 of the 1961 Mullard Maintenance Manual. When supplied from a 90volt HT supply the DF96 vari-mu RF pentode should have only 64volts on the screen grid. Anode current is 1.65mA and screen current 0.55mA.
Vg2 = Va when supplied from a 64volt HT battery. The same conditions apply to the DF91, Vg2 less than Va when the HT is 90V. Suppressor grid g3 is returned to F-. Looking at circuit diagrams of various radios that employ the 96 series valves the screen grid of the DF96 is supplied via a 39Kohm resistor. Some sets employ a common screen grid supply resistor for the DK and DF valves. DK91/1R5 has a double screen grid arrangement, G2 and G4.
The Philips developed? DK92 and DK96 the screen grid is G4. Oscillator grids G1 and 2. Oscillator grid resistor returned to F+.
Output pentodes DL92, DL94 and DL96 can operate with single section of the filament. Operates in economy mode.
In 1955 Champion Radio manufactured two mains-battery four waveband receivers, models 781A and 781B. DF91 used as RF and IF amplifiers, screen grids supplied via 4.7Kohm resistors. Information for these sets can be found in the 1956/57 R & T servicing book.
Geordie McBoyne.
Vg2 = Va when supplied from a 64volt HT battery. The same conditions apply to the DF91, Vg2 less than Va when the HT is 90V. Suppressor grid g3 is returned to F-. Looking at circuit diagrams of various radios that employ the 96 series valves the screen grid of the DF96 is supplied via a 39Kohm resistor. Some sets employ a common screen grid supply resistor for the DK and DF valves. DK91/1R5 has a double screen grid arrangement, G2 and G4.
The Philips developed? DK92 and DK96 the screen grid is G4. Oscillator grids G1 and 2. Oscillator grid resistor returned to F+.
Output pentodes DL92, DL94 and DL96 can operate with single section of the filament. Operates in economy mode.
In 1955 Champion Radio manufactured two mains-battery four waveband receivers, models 781A and 781B. DF91 used as RF and IF amplifiers, screen grids supplied via 4.7Kohm resistors. Information for these sets can be found in the 1956/57 R & T servicing book.
Geordie McBoyne.






