22-05-2011, 07:00 PM
Hi All,
Ok I'm stuck!
I'm wondering whether to:
a) put the original cap back in and retry (I do have a spare UL41 too) but I'm concerned why it had a 8uF cap connected to the 16uF side?(see photo)
b) use a triple cap that I have that 32/32/16 but no fourth connector (cap has -ive can indication)
c) use a 16/16 500v can (RS) but I only have a 15uF 250v electrolytic to put in parallel with one of the 16uF side - I'm concerned that 250v is too low.
Help please??
Regards
Rob
[attachment=1560][attachment=1561]
Ok I'm stuck!
I'm wondering whether to:
a) put the original cap back in and retry (I do have a spare UL41 too) but I'm concerned why it had a 8uF cap connected to the 16uF side?(see photo)
b) use a triple cap that I have that 32/32/16 but no fourth connector (cap has -ive can indication)
c) use a 16/16 500v can (RS) but I only have a 15uF 250v electrolytic to put in parallel with one of the 16uF side - I'm concerned that 250v is too low.
Help please??
Regards
Rob
[attachment=1560][attachment=1561]
if all else fails...read the instructions!
