Today I finished my new mast located at the end of the garden, and hoisted the new long wire aerial. In the end to save on the suspended weight I used bare 14 gauge solid copper wire (about 1.7mm diameter) for the aerial and drop.
It is suspended from a rope around the base of the chimney to the top of a wooden mast about 6m high fitted to my brick shed, very similar to my original drawing on post #22 http://golbornevintageradio.co.uk/forum/showthread.php?tid=6522&pid=70874#pid70874
I am happy to say that early tests seem to indicate it is much better than my old aerial.
The new RF earth also seems to make more of a difference with this new higher wire as well, I have not tried it with any matching unit as yet.
Mike
It is suspended from a rope around the base of the chimney to the top of a wooden mast about 6m high fitted to my brick shed, very similar to my original drawing on post #22 http://golbornevintageradio.co.uk/forum/showthread.php?tid=6522&pid=70874#pid70874
I am happy to say that early tests seem to indicate it is much better than my old aerial.
The new RF earth also seems to make more of a difference with this new higher wire as well, I have not tried it with any matching unit as yet.
Mike






