28-08-2017, 10:02 PM
Hi.
Again what an excellent multimeter. As a frequency counter it works well with my signal generator up to around 18kHz then it reads low and above 21mhz the reading jumps around, a two transistor rf amp restores the readout up to around 50mhz, I'd suspect with more drive then higher frequencies could be measured, a dedicated frequency counter would be more practical though. All other ranges tie in with the AN8008 and my Fluke. The temperature facility is also very accurate, I have my Dads old photographic thermometer and it's within a degree of its range, checking the freezer which is -17c the readout was corresponding to it. I've not checked the current ranges as yet though.
So far so good, no complaints and a terrific purchase.
Again what an excellent multimeter. As a frequency counter it works well with my signal generator up to around 18kHz then it reads low and above 21mhz the reading jumps around, a two transistor rf amp restores the readout up to around 50mhz, I'd suspect with more drive then higher frequencies could be measured, a dedicated frequency counter would be more practical though. All other ranges tie in with the AN8008 and my Fluke. The temperature facility is also very accurate, I have my Dads old photographic thermometer and it's within a degree of its range, checking the freezer which is -17c the readout was corresponding to it. I've not checked the current ranges as yet though.
So far so good, no complaints and a terrific purchase.
