03-08-2017, 08:16 AM
(03-08-2017, 07:15 AM)pwdrive Wrote: Thanks for the replies, I take it then that the DC voltage on pin 5 should be approx. half of the supply rail voltage....
Indeed. From the first page of the datasheet http://www.ti.com/lit/ds/symlink/lm386.pdf, see below:
sıʌǝɹq ɐʇıʌ `ɐƃuol sɹɐ
ʞɔıu
ʞɔıu







