03-08-2017, 01:04 AM
I want to try and do a better job of expressing myself. Some times diagrams are presented as part of the theory of operation and others are presented as suggested construction circuits. Both of the schematics in my previous post were from the datasheet. One was representing the basic circuit operation without regard to biasing the other was a construction drawing. Here are similar diagrams for my present project.
this is from the first page of the datasheet. It just presents the idea that you could build an amp using the device.
The evaluation board looks a little more complicated.
This is the circuit as built.
The second and third pictures are from the AN that comes with the evaluation board.
They leave a lot out of the datasheet expecting us to know about the devices. Twenty years ago when the devices we new the datasheets were more detailed.
Quite often we see what is sometimes called "book circuits" they are representative of the circuit but not functional. (or not fully detailed)
this is from the first page of the datasheet. It just presents the idea that you could build an amp using the device.
The evaluation board looks a little more complicated.
This is the circuit as built.
The second and third pictures are from the AN that comes with the evaluation board.
They leave a lot out of the datasheet expecting us to know about the devices. Twenty years ago when the devices we new the datasheets were more detailed.
Quite often we see what is sometimes called "book circuits" they are representative of the circuit but not functional. (or not fully detailed)







