Hi
Thanks, I was impressed with the tuning indicator as well, but it does need a good high HT to make it reliable. I tried 3 rectifiers, eventually I found one which gave an HT (measured at OP valve anode) of nearly 230v. The original rectifier from the KB 540, which only gave just over 205v, will go back into the 540 as that radio has no tuning indicator and one less valve.
There is a trimmer potentiometer for adjustment of the tuning indicator, manual says 1/4 inch long when no signal. But I have found it is better if it is set to about 1/2 inch, it seems to give a larger range of length.
Mike
Thanks, I was impressed with the tuning indicator as well, but it does need a good high HT to make it reliable. I tried 3 rectifiers, eventually I found one which gave an HT (measured at OP valve anode) of nearly 230v. The original rectifier from the KB 540, which only gave just over 205v, will go back into the 540 as that radio has no tuning indicator and one less valve.
There is a trimmer potentiometer for adjustment of the tuning indicator, manual says 1/4 inch long when no signal. But I have found it is better if it is set to about 1/2 inch, it seems to give a larger range of length.
Mike






