10-07-2017, 09:43 AM
Would a live chassis radio be legal today? I don't see why not, provided it complied with BS415 (actually its modern BS EN 62368 equivalent).
I used to have a copy, many years ago, and it was a wondrous document, full of test fingers, test pins and even a test necklace for various tests to ensure that no live parts could accidentally be touched by the user.
It must be remembered that live chassis TVs existed well into the colour TV era. However, a continual move away from valves, not to mention the demand for SCART sockets, and the widespread introduction of switched mode PSUs brought about their demise in the 1980s. Radios, of course, had succumbed to total transistorisation and low voltage operation - even when mains driven - much earlier.
The introduction of safer components, such as potentiometers with nylon spindles, made the production of live chassis radios progressively more simple. So long as all exposed fixings, such as those holding the back cover in place, are isolated from mains contact and the ventilation slots do not allow accidental contact with live parts, I see no reason why someone could not release a live chassis radio on the market today - if they can find a source of suitable valves, of course!
The line cord was a necessary evil with imported sets of US origin (or originally designed for use in the US) because of the necessity of dropping the 120V excess in the UK mains voltage to the 117V required by the radio. There would have been no space available for a dropper inside the set and, even if there was, the sets weren't designed to accommodate the heat dissipated by such an item, making a line cord the only way to go.
The problem was that customers would insist on hiding them under the carpet or, worse still from the point of view of the set itself, cutting the cord short!
I'm sure that some UK manufacturers used similar design practices but took advantage of the higher mains voltage to increase the HT. I say this because I recall, when I first started work, coming across some dusty line cords sold by Radiospares, as they were called in those days, which had taps built into the line cord so that there were two wires in and three out!
I used to have a copy, many years ago, and it was a wondrous document, full of test fingers, test pins and even a test necklace for various tests to ensure that no live parts could accidentally be touched by the user.
It must be remembered that live chassis TVs existed well into the colour TV era. However, a continual move away from valves, not to mention the demand for SCART sockets, and the widespread introduction of switched mode PSUs brought about their demise in the 1980s. Radios, of course, had succumbed to total transistorisation and low voltage operation - even when mains driven - much earlier.
The introduction of safer components, such as potentiometers with nylon spindles, made the production of live chassis radios progressively more simple. So long as all exposed fixings, such as those holding the back cover in place, are isolated from mains contact and the ventilation slots do not allow accidental contact with live parts, I see no reason why someone could not release a live chassis radio on the market today - if they can find a source of suitable valves, of course!
The line cord was a necessary evil with imported sets of US origin (or originally designed for use in the US) because of the necessity of dropping the 120V excess in the UK mains voltage to the 117V required by the radio. There would have been no space available for a dropper inside the set and, even if there was, the sets weren't designed to accommodate the heat dissipated by such an item, making a line cord the only way to go.
The problem was that customers would insist on hiding them under the carpet or, worse still from the point of view of the set itself, cutting the cord short!
I'm sure that some UK manufacturers used similar design practices but took advantage of the higher mains voltage to increase the HT. I say this because I recall, when I first started work, coming across some dusty line cords sold by Radiospares, as they were called in those days, which had taps built into the line cord so that there were two wires in and three out!






