02-04-2017, 07:03 PM
(This post was last modified: 02-04-2017, 07:06 PM by ppppenguin.)
I'm back home and on the case again. I've done some experiments and am fairly sure (not 100% but pretty close) that when I switch off using the power button on the PC but leave the mains connected it doesn't hang after switch on. Conversely if I switch off using the power button on the PC and then switch off at the mains it does hang soon after switch on.
If I don't switch off at the mains then the monitors go into standby, the speakers stay active and a small network router stays powered. I can't imagine any of this is relevant to the problem but as well to mention it.
As with most of my PCs I've set the BIOS so that the PC restarts after loss of mains, in other words when I've switched off at the mains I don't have to press the power button to boot the PC. I happen to like my PCs to work this way and it's never caused any problems in the past but I might change this and see if it makes a difference.
If I don't switch off at the mains then the monitors go into standby, the speakers stay active and a small network router stays powered. I can't imagine any of this is relevant to the problem but as well to mention it.
As with most of my PCs I've set the BIOS so that the PC restarts after loss of mains, in other words when I've switched off at the mains I don't have to press the power button to boot the PC. I happen to like my PCs to work this way and it's never caused any problems in the past but I might change this and see if it makes a difference.
www.borinsky.co.uk Jeffrey Borinsky www.becg.tv







