14-02-2017, 10:27 AM
That's right, Mike. That Gemini or figure of eight cable saves pulling two individual cables.
The telephony, incidentally, is only twisted pair for a short distance. If you see a pair of cabinets side by side, one larger than the other, the large one is where the fibre loop is connected back to the switch in the local hub or headend. There is a helluva lot of processing power in that cabinet!
There are also rechargeable batteries in that cabinet to maintain service in the event of a power failure.
Unlike the TV/broadband the telephony uses two fibre loops with the data circulating in opposite directions in each loop.
This provides a back-up in the event that someone digs up the fibre. If the signal in one direction stops, the data is automatically looped back to the other fibre with the same thing happening on the other side of the break, thus maintaining full service over the entire loop. If, on the other hand, the fault is in the adjacent cabinet, only service from that cabinet is affected. Alarms sent back to the switch warn of the problem but unaffected customers won't even know there is something wrong.
The telephony, incidentally, is only twisted pair for a short distance. If you see a pair of cabinets side by side, one larger than the other, the large one is where the fibre loop is connected back to the switch in the local hub or headend. There is a helluva lot of processing power in that cabinet!
There are also rechargeable batteries in that cabinet to maintain service in the event of a power failure.
Unlike the TV/broadband the telephony uses two fibre loops with the data circulating in opposite directions in each loop.
This provides a back-up in the event that someone digs up the fibre. If the signal in one direction stops, the data is automatically looped back to the other fibre with the same thing happening on the other side of the break, thus maintaining full service over the entire loop. If, on the other hand, the fault is in the adjacent cabinet, only service from that cabinet is affected. Alarms sent back to the switch warn of the problem but unaffected customers won't even know there is something wrong.






