10-01-2017, 05:35 AM
Had a go at the connector today. Its a wedge that pushes onto the metal contacts above the ribbon, there is no "box" in the black base for it to fit in, a purely friction fit with the metal bits going into multiple fingers on the white plastic wedge. Not the hinge up type I have seen before, an appalling poor idea.
No chance of it fitting.
Located the ribbon ok onto the contacts and taped 2 bits of match stick so that the base cover puts pressure on the ribbon.
Happy that I had contact, I re-assembled it all but its still not working so assume that the pad itself is duff, highly likely as it has been making an intermittent contact when the pointer was jumping all over the screen before it went off.
So I have given it up as a bad job, can't win them all. Patience exhausted.
Silk purse and sow's ear thing.
Won't be buying another - ever.
No chance of it fitting.
Located the ribbon ok onto the contacts and taped 2 bits of match stick so that the base cover puts pressure on the ribbon.
Happy that I had contact, I re-assembled it all but its still not working so assume that the pad itself is duff, highly likely as it has been making an intermittent contact when the pointer was jumping all over the screen before it went off.
So I have given it up as a bad job, can't win them all. Patience exhausted.
Silk purse and sow's ear thing.
Won't be buying another - ever.
Boater Sam.







