04-01-2017, 01:43 AM
Today I printed out three more schematic pages I had lacked but now these appear to be incredibly helpful. I just tested R9 R10 and R11 with my meter and all is well with those. Really I just wanted to identify them and clean around with buds.
I noticed too a soldered, empty lug on the output transformer (very suspicious as clearly it had been in circuit). Of course my eyes are very poor and only notice at very close range.
I don't want to bore people with these points but I think it's good practice for me to better study the schematic and apply it to my meter tests. The repair shouldn't be difficult so I can change leaky capacitors too.
When it's all done I'll run a feature on my website.
I noticed too a soldered, empty lug on the output transformer (very suspicious as clearly it had been in circuit). Of course my eyes are very poor and only notice at very close range.
I don't want to bore people with these points but I think it's good practice for me to better study the schematic and apply it to my meter tests. The repair shouldn't be difficult so I can change leaky capacitors too.
When it's all done I'll run a feature on my website.
