29-12-2016, 09:58 AM
(29-12-2016, 08:39 AM)Crackle Wrote: Are you sure the push buttons have to come of, often they just pull backwards through the front panel with the printed circuit once their screws are released from the case.
I agree with Mike here but I don't think it applies here because the photographs of the chassis show that it comes out of the cabinet complete with scale and knobs.
I am concerned here that what you are doing could lead to considerable harm being caused yet leave you no further forward with your dismantling attempts - and none of us want to see that happen.
Take a very careful look at what holds the entire assembly in the cabinet. When you've identified the fixings it should take only a matter of seconds to remove the unit from the cabinet. One little thing to look out for - make sure you disconnect the loudspeaker (unless it has very long wires) so that the chassis is completely free when you remove it. The speaker should be the only thing left in the cabinet when the chassis is removed.
