24-12-2016, 09:00 PM
I am not at home at the moment and it's the last Chritmas rush scenario. So I'll add information later. There are slight differences in Saalburg model numbers but I imagine no major circuit difference. The stringing mechamism would clearly be no picnic unless you really take very detailed notes and photos. I should add that most people who posted for advice in the past had oscillator voltage issues or assumded low anode voltage was part of the problem. All my voltages are A OK except the Triode anode of the AM Hexode which is dead. I will check any short to ground where I can and only remove the PCB if I need better access. However Christmas has stopped me in my tracks for now.
