01-12-2016, 10:28 PM
(01-12-2016, 09:13 PM)Synchrodyne Wrote: An aspect of series feedback RIAA-equalized amplifiers is that they have an inherent HF error, with the actual curves having another HF pole after which they flatten out, the position of this being dependent on the open-loop gain relative to the amount of feedback.
True, but isn't that an HF zero, not a pole? The gain stops falling and levels out at unity.
Good point that adding a simple RC stage can cancel it, and moreover if placed early on, can stop ultrasonic signals getting in and overloading things, without upsetting the RIAA characteristic!







