27-11-2016, 02:32 PM
(27-11-2016, 01:31 PM)Murphyv310 Wrote: Surely to get a "current" amplifier we need to be thinking of grounded Grid or Base in a transistor amp?No, those are voltage amplifiers, they have no current gain at all as cathode current = anode current, and approximately emitter current = collector current. The gain is thus approximately RLoad / Rin as long as that is lower then the device gain.
Common emitter is a current amplifier and voltage amplifier, the input is almost a fixed DC voltage.
Emitter or Cathode followers are "current amplifiers" with voltage gain = 1
However a current amplifier usually implies the input is connected differently. There are also "Norton" op-amps, such as LM3900 that need input resistors to convert voltages to currents.







