26-11-2016, 08:58 PM
(This post was last modified: 26-11-2016, 08:59 PM by Geordie McBoyne.)
Hi Bob,
My SP25 record deck came with the Shure M75-6S pick-up cartridge so it's for certain your pre-amplifier will work very well indeed. The design of the pre-amplifier demands that the valve heaters are supplied from a 12volt DC source , however, it is a simple matter to rewire the circuit for a 6.3volt AC supply. The high mu ECC83 draws only 1.2mA anode current per section.
A separate power supply will be installed in this radiogram after an FM tuner has been fitted because the existing mains transformer is close to being overloaded.
Geordie McBoyne.
My SP25 record deck came with the Shure M75-6S pick-up cartridge so it's for certain your pre-amplifier will work very well indeed. The design of the pre-amplifier demands that the valve heaters are supplied from a 12volt DC source , however, it is a simple matter to rewire the circuit for a 6.3volt AC supply. The high mu ECC83 draws only 1.2mA anode current per section.
A separate power supply will be installed in this radiogram after an FM tuner has been fitted because the existing mains transformer is close to being overloaded.
Geordie McBoyne.






