26-11-2016, 12:33 PM
If you're curious about the LED backlight configuration, this video shows a typical setup:
https://www.youtube.com/watch?v=jb7ZzW03lW4
They're not all the same - as was said earlier, some are edge-lit.
One of the most interesting aspects of that video are explanations of the various layers of diffuser films. As you'll see, it's surprisingly complex. You can expect 3 or 4 layers, which all look broadly similar but must be in the right order when you reassemble the panel. When Trevor said "polarizing sheets", that's what he was referring to - although they're not actually polarizing filters - those are glued to the panel itself.
I have a couple of old panels at work, and show them to classes when we're discussing how displays work. It certainly makes an otherwise "dry" subject more interesting. Those layers are really fascinating - I can't help thinking that there must be lots of other uses for them. A good trick to hold up the bare panel between the projector and the screen. Being an LCD projector, the light from it is polarized, so rotating the panel results in a shadow of different colours! And, in one corner, I've peeled back the polarizing films for a couple of inches, and so that corner changes from light to dark(ish) as you rotate the panel. Also, the (sticking up) corners of polarising film can demonstrate the same effect. Finally, on an old monochrome panel I have (from a late '80s "portable" computer), all the row and column connections are along the edges (they join to the PCB via elastomeric in the conventional way). This means you can hold the panel in the way of the projector again, and then use static electricity to control the pixels. Everyone thinks that's magic!
Modern LCD panels have the driver chips on the flex-print that is bonded to the panel. The track density leaving those chips is amazing!
It does sound like a dead LED, unfortunately. On the plus side, things have improved a lot in LCD screens in the last 7 years. I don't visit TV shops these days, but certainly based on what we see coming in through the doors here, I'm often pleasantly surprised by what I see. Though I still use a CRT at home
Given that these things have a relatively short life-span, and also given the pace of change these days, I'm not convinced I'd want to spend much on a modern TV set. And I wouldn't regard the "big brands" as the premium offering they once were. My local pub has a new Hitachi or Toshiba (can't remember which, but no-doubt a Vestel underneath) that is really very good when fed with HD. Being a pub TV, it was the cheapest they could find, and if it lasts a year or 2, it was a good buy.
https://www.youtube.com/watch?v=jb7ZzW03lW4
They're not all the same - as was said earlier, some are edge-lit.
One of the most interesting aspects of that video are explanations of the various layers of diffuser films. As you'll see, it's surprisingly complex. You can expect 3 or 4 layers, which all look broadly similar but must be in the right order when you reassemble the panel. When Trevor said "polarizing sheets", that's what he was referring to - although they're not actually polarizing filters - those are glued to the panel itself.
I have a couple of old panels at work, and show them to classes when we're discussing how displays work. It certainly makes an otherwise "dry" subject more interesting. Those layers are really fascinating - I can't help thinking that there must be lots of other uses for them. A good trick to hold up the bare panel between the projector and the screen. Being an LCD projector, the light from it is polarized, so rotating the panel results in a shadow of different colours! And, in one corner, I've peeled back the polarizing films for a couple of inches, and so that corner changes from light to dark(ish) as you rotate the panel. Also, the (sticking up) corners of polarising film can demonstrate the same effect. Finally, on an old monochrome panel I have (from a late '80s "portable" computer), all the row and column connections are along the edges (they join to the PCB via elastomeric in the conventional way). This means you can hold the panel in the way of the projector again, and then use static electricity to control the pixels. Everyone thinks that's magic!
Modern LCD panels have the driver chips on the flex-print that is bonded to the panel. The track density leaving those chips is amazing!
It does sound like a dead LED, unfortunately. On the plus side, things have improved a lot in LCD screens in the last 7 years. I don't visit TV shops these days, but certainly based on what we see coming in through the doors here, I'm often pleasantly surprised by what I see. Though I still use a CRT at home
Given that these things have a relatively short life-span, and also given the pace of change these days, I'm not convinced I'd want to spend much on a modern TV set. And I wouldn't regard the "big brands" as the premium offering they once were. My local pub has a new Hitachi or Toshiba (can't remember which, but no-doubt a Vestel underneath) that is really very good when fed with HD. Being a pub TV, it was the cheapest they could find, and if it lasts a year or 2, it was a good buy.







