20-11-2016, 09:58 PM
I've taken a couple of pictures of the AG2101D, one of which shows the mechanism from the underside, including the load/eject mechanism. This is basically a swivelling plate to which are attached levers which operate the different functions. E.G., putting a record into the slot pushes a pin rearwards which causes the pickup to move over the beginning of the disc, where it is lowered into the playing position, and when the stylus reaches the end of the run-out groove, te reverse procedure applies, opening the microswitch contacts, lifting the arm and moving it to the rest position, and ejecting the disc. During this process the spring loaded 'record keeper', a 1.5" diameter disc is lowered. Obviously excess friction in any of these parts will cause a malfunction, so I've cleaned and relubed all of them, so hopefully it will now work as designed after I've reassembled it!






