14-11-2016, 02:15 PM
Thanks Mark, here's a copy of the schematic of the power amp stage, it has as you say emitter R's and from what I've gleaned so far this takes care of any hfe discrepancy.
The amp has protection circuit's and I'll run it up on a variac and LL. I'm pretty sure it's the pre amp section that is the problem but yes it's the biggest amp I've worked on so is a bit scary. I have the working channel to compare it too which helps.
Andy.
The amp has protection circuit's and I'll run it up on a variac and LL. I'm pretty sure it's the pre amp section that is the problem but yes it's the biggest amp I've worked on so is a bit scary. I have the working channel to compare it too which helps.
Andy.







