07-11-2016, 12:47 PM
You think 1nF is low - I've seen 100pF!! Though it was with 2.2MΩ. (Vidor CN430 radio).
The calculation gives 1.4 etc 10^-8 which is 14nF actually, so 22nF would be reasonable.
This largely explains your measurements. 1nF and 220kΩ has a roll-off at 723Hz, so you will get progressively less transmission below that.
I don't know why you see 0V at 1kHz, but reckon it's to do with your set-up, maybe an earth loop creating false pickup which nulls out your actual signal.
The calculation gives 1.4 etc 10^-8 which is 14nF actually, so 22nF would be reasonable.
This largely explains your measurements. 1nF and 220kΩ has a roll-off at 723Hz, so you will get progressively less transmission below that.
I don't know why you see 0V at 1kHz, but reckon it's to do with your set-up, maybe an earth loop creating false pickup which nulls out your actual signal.







