01-10-2016, 07:33 AM
(30-09-2016, 10:42 PM)radioman Wrote:(30-09-2016, 03:41 PM)Murphyv310 Wrote: I considered building a preamp for some time but today after chatting to Radioman on Wednesday went ahead.Hi Trevor,
Andy said make a preamp with a FET, the thought of using these ultra modern devices in a 1955 record player made me shudder.
That's a good use for one of those Russian valves - well done.
I wouldn't call a FET an 'ultra modern device' though, I think it was developed before your rod pentodes !
A 2N3819 is probably contemporary with them.
https://en.wikipedia.org/wiki/Field-effe...or#History
Andy
Hi Andy.
Thanks for the compliment
The rod pentodes I believe had their first use in 1957, used in Sputnik!! No doubt the development was done for many years beforehand but yes the FET would have been a neater way round, mind you I've a lot more rod valves than FET's.I want to do a small mod to the circuit, the 1.8meg HT dropper tied in with the 47uf decoupler has a far too long time constant, it takes a couple of minutes for the rod valve anode/screen to get to 30v and once at that voltage it seems to slowly rise and fall no doubt due to the conduction of the valve. I will try dropping the value to 820k and fit a 47v zener across the decoupler. I did try a higher HT in the "development" stage when I was using PP3 batteries and the circuit works very well with 5 PP3= 45v.
Even though the HT seems to slightly rise and fall I had the Black Box in the house last night and we listened to a few albums, the result was very pleasing indeed.






